Water Electrolysis Machine Chlorine Dioxide Generator with 5000 g / h Chlorine Output

Introduction

Chlorine dioxide, ClO2, is one of the most effective bleaching agents for use in industrial and domestic process and services, and for commercial and consumer products. The strong oxidative potential of the molecule makes it ideal for a wide variety of uses that include disinfecting, sterilizing, and bleaching. Concentrations of chlorine dioxide in an aqueous solution as low as 1 part per million (ppm) or less, are known to kill a wide variety of microorganisms, including bacteria, viruses, molds, fungi, and spores. Higher concentrations of chlorine dioxide, up to several hundred ppm, provide even higher disinfection, bleaching and oxidation of numerous compounds for a variety of applications, including the paper and pulp industry, waste water treatment, industrial water treatment (e.g. cooling water), fruit-vegetable disinfection, oil industry treatment of sulfites, textile industry, and medical waste treatment

Equipment feature

1. Electrolyzer inlet water pretreatment system to protect electrolytic diaphragm and electrode plate

2. Double protection of chlorine leakage, hydrogen leak detector and generator to ensure absolute safety of equipment operation

3. Isolated salting system to ensure no disinfection gas leakage when adding salt

4. The electrolyzer can automatically replenish water and automatically discharge sewage

5. The device can be remotely controlled via the Internet

6. The system can adjust the chlorine output automatically according to the signal of the residual chlorine meter. It can also adjust the chlorine output automatically according to the water flow by the flow meter.

7. The dissolving tank can storage the salt for 168 hours operation of the system. The dissolving tank has a salt observation window to observe the residual salt.

Advantages

1. The active chlorine output can be adjusted from zero to maximum continuously, with an adjustment accuracy of 0.1 g/h

2. The raw material required is salt only, salt consumption <1.6kg/kg Cl2

3. The system can adjust the chlorine output automatically according to the signal of the residual chlorine meter. It can also adjust the chlorine output automatically according to the water flow by the flow meter.

4. The switch status, the active chlorine output, the electrolysis voltage, electrolytic cell temperature, and the fault indicator can be networked for remote monitoring and control.

5. The generator has a manual/automatic switch to switch the device operation mode.

6. The dissolving tank can storage the salt for 168 hours operation of the system. The dissolving tank has a salt observation window to observe the residual salt.

7. The electrolyzer has a temperature sensor that automatically controls the cell temperature to less than 40 degrees.

8. Perfluorinated electrolytic membrane, which has low resistivity, corrosion resistance, cleaning free and long service life.

9. The electrode is coated with a Ru-Ir-Pt precious metal, high electrolysis performance and long service life

10. Automatic water replenishment according to the working status of the electrolytic cell, automatic sewage drain out

11. Intelligent high-frequency switching rectifier, main components IGBT module, rectifier module, rectifier bridge, capacitor, etc. are all selected from the international famous brand, capable of continuous and trouble-free operation at full load.

12. PVC shell body, integrated design, small equipment footprint, simple installation, easy to use and maintain

Specification